Pereiti prie turinio

Mon–Fri 8–18

We work across Lithuania
Advice

When to replace a gas boiler and when a repair is enough

Updated 10 November 2026 · 6 min read · Prepared by the technicians of Visų katilų remontas

A boiler rarely fails in one day and for good. More often it ages gradually: one winter the pump is replaced, the next the electronic board, and a year later the technician says the part needed is no longer made. Each time you face the same question: repair it once more or replace it at last? There is no single answer that suits everyone, but there are a few clear signs that help you decide calmly rather than on a January night beside a cold radiator.

In brief

  • The age of the boiler alone is not a reason to replace it: a well-maintained boiler can last a long time.
  • Replacement is worth considering when faults keep recurring, parts are no longer made or a repair costs a considerable share of the price of a new boiler.
  • If measurements show unsafe combustion or the heat exchanger is leaking, the boiler must not be used until it has been repaired or replaced.
  • A new gas boiler for a house will almost always be a condensing one: EU rules require it.
  • Replacement is best planned for the summer, while the boiler is still working.

Does the age of the boiler matter

People often ask how many years a gas boiler lasts. It is impossible to answer honestly with a single number. Service life depends not only on the manufacturer and model, but also on how the boiler was installed, the quality of the water in the system, whether it is serviced every year and whether its output suits the house. The same model works flawlessly in one house after many years, while in another it keeps breaking down after just a few.

So age alone is not a reason to replace a boiler. What matters far more is how it works now and how much it costs to keep it running. The signs worth watching for are described below.

3× 1234 frequent faultsno parts availableold, usesthe house or needs a lot of gashave changed
The four most common signs that it is time to consider a new boiler.

Signs that replacement is worth considering

1. Faults keep recurring

One fault every few years is normal: a boiler has moving parts and parts that are constantly hot, and they wear. It is different when a technician is called out every season, each time for a different part. This is a sign that the whole boiler is wearing out, not just one part of it. In that case every new repair only postpones the next fault.

2. Parts are no longer made

Manufacturers make parts for older models for a long time, but not for ever. When the original part is no longer available, an equivalent or a newer version of the same part sometimes fits. If those are not available either, even a recently repaired boiler may stop one day because of a part that can no longer be bought. If the technician warns you that parts for your boiler are running out, it is worth planning the replacement in advance.

3. The repair costs too much

When the most expensive boiler parts fail, such as the heat exchanger or the electronic board, the repair can cost a considerable share of the price of a new boiler. In that case it is useful to ask the technician for two prices: the repair and a new boiler with installation. If the boiler is old and has already been repaired more than once, it often makes more sense to invest in a new one that comes with a warranty.

4. Safety problems

During servicing the technician measures combustion. Manufacturers give clear limits: for example, the Vaillant manual states that if the carbon monoxide (CO) concentration in the flue gas exceeds 350 ppm, the technician must check the flue, the electrode and the combustion chamber, and must not allow the boiler to be used until the problem has been identified and resolved. The same applies when the heat exchanger or the flue gas passages develop a leak. If it cannot be fixed or the repair is not worth the cost, the boiler has to be replaced. This is not a situation where you can wait until spring.

Important: if the carbon monoxide detector has gone off, you can see flame or soot marks on the boiler casing, or you smell gas, switch off the boiler and call a specialist. We cover this in more detail in the article "Carbon monoxide and gas safety at home".

5. An old atmospheric boiler

Older boilers, known as conventional or atmospheric boilers, send hot flue gases straight up the chimney, so part of the heat is lost outdoors. A condensing boiler cools the flue gases and returns that heat to the heating system. Since 26 September 2015, EU Regulation 813/2013 has required new boilers to reach a seasonal space heating efficiency of at least 86 %, which in practice only condensing boilers can achieve. An old boiler can keep working, but replacing it with a newer one usually reduces gas consumption. By exactly how much depends on the house and on how the boiler has been used.

6. The house or your needs have changed

After a renovation, once the walls and roof have been insulated, the house needs considerably less heat. In such a house an old, oversized boiler switches on and off frequently, so it works inefficiently and wears out faster. Another situation: the family has grown and the combi boiler can no longer heat enough hot water for several showers. Then it is worth considering a boiler with a different output or a boiler with a water heater.

When a repair is enough

Not every fault means it is time to replace the boiler. A repair is often enough if:

  • the boiler is relatively new and the fault is the first one or a rare one;
  • an inexpensive, easily replaced part has failed: a sensor, electrode, valve or gasket;
  • parts for this model are still made and available;
  • the combustion measurements taken during servicing were in order;
  • the boiler output still suits the house.

Sometimes a boiler breaks down not because of itself but because of the system: contaminated water shortens the life of the pump and the heat exchanger. In that case it is worth flushing the heating system along with the repair, otherwise the same trouble will recur with a new boiler too. We cover this in more detail in the article "Heating system flushing".

What to choose instead of the old boiler

If you have decided to replace the boiler, it is worth answering a few questions first.

  • What output do you need? Not the same as the old boiler, but what the house needs now. The guide to boiler output will help you make a rough estimate; a technician or heating designer calculates it precisely.
  • Will you need hot water? A combi boiler heats water as it flows, while a boiler with a water heater stores it. The differences are explained in this guide.
  • Where will the flue gases and condensate go? A condensing boiler needs a condensate-resistant flue and a way to drain the condensate into the sewer. An old masonry chimney is suitable only with a special liner.
  • Is another heating method worth choosing? In some houses a heat pump or a hybrid system is worth considering. We write about this in the article "Heat pump or gas boiler".

Calculator: what boiler output you need

m²
What is your house like?

This is a guide for an initial choice, not a design calculation. For a combi boiler the output is often determined by hot water rather than heating. A technician calculates the exact output from the heat losses of the house.

In blocks of flats where the boiler is connected to a shared natural-draught chimney, the EU regulation allows an exception: a conventional boiler may still be installed here if its output does not exceed 10 kW (heating only) or 30 kW (combi). During the inspection the technician will assess whether this exception applies in your case or whether you need a condensing boiler with a new flue.

When is the best time to replace

The best time to replace a boiler is while the old one still works. In summer and early autumn it is easier to agree an installation date, choose a model without rushing and wait for the parts you need. If the boiler fails during a cold spell, the decision has to be made within a few days, and sometimes you have to choose from whatever is in stock at the time. We have described the whole replacement process, from the survey to commissioning, in the article "Boiler replacement from A to Z".

Frequently asked questions

How many years does a gas boiler last?

There is no single figure. Service life depends on the model, the quality of the installation, the water in the system, how regularly the boiler is serviced and whether its output suits the house. So when deciding on a replacement, how the boiler works now matters more than how old it is.

Can I keep using an old atmospheric boiler?

Yes, if it is in good order and safe. The EU requirements apply to boilers newly placed on sale, not to those already installed. However, a new condensing boiler usually uses less gas.

Does the new boiler have to have the same output as the old one?

Not necessarily. Especially after renovation, a house may need a much lower output. An oversized boiler switches on and off frequently and runs inefficiently.

Can a boiler be replaced in winter?

Yes, but then there is less time to choose and you sometimes have to wait for the equipment or the installer. If the boiler is already causing trouble, it is worth planning the replacement for the summer.

Need a technician?

We have worked across Lithuania since 2016 and arrive with spare parts. Describe the situation or give us a call.

Tips: When to replace a boiler

Write the boiler manufacturer and model or attach a photo of the rating plate – we will call you and help.

+370 630 13331Request a service

Sources

  1. Commission Regulation (EU) No 813/2013 on ecodesign requirements for space heaters, Annex II
  2. Vaillant ecoTEC plus VU/VUW, installation and maintenance instructions, doc. 0020308118_05 (2023-05-31): combustion check, CO and O₂ limits

This article is general information. Always follow the manual of your own boiler, and leave work on gas and combustion components to a certified specialist.

More tips

CallRegister