Pereiti prie turinio

Mon–Fri 8–18

We work across Lithuania

Heat exchanger flushing

The heat exchanger is one of the most important parts of a heating system and is responsible for efficient heat transfer. Over time limescale, sludge and dirt build up inside it, reducing the efficiency of the unit and increasing energy consumption. Regular heat exchanger flushing ensures that your heating system works at its best and lasts as long as possible.

Heat exchanger flushing from 80 €
REGISTER

Work carried out by our company:

silumokaičio-plovimas

Why is it important to flush the heat exchanger?

Higher efficiency. A clean heat exchanger transfers heat much better than a scaled one, so rooms warm up faster and more evenly.

Lower energy consumption. A dirty heat exchanger makes the system work harder and use more fuel or electricity.

Faults are avoided. Limescale causes overheating, which can damage the boiler or heat pump and lead to an expensive repair.

Longer service life. A heat exchanger that is flushed regularly wears out much more slowly and lasts longer.

The warranty is kept. Most manufacturers list regular heat exchanger cleaning as a warranty condition.

When does a heat exchanger need flushing?

A heat exchanger needs flushing regularly, but certain signs show that it can no longer wait. Contact a specialist if you notice at least one of the following:

The boiler or heat pump heats worse. Rooms do not reach the set temperature even though the system is running at full capacity.

Higher heating costs. Gas or electricity bills have gone up although your usage has not changed.

The boiler shuts down often. A scaled heat exchanger causes overheating and the system switches off by itself.

You hear humming or bubbling. Unusual noises in the system often point to limescale in the heat exchanger.

More than 2 years have passed since the last flushing. Even if the system works normally, deposits build up and reduce efficiency.

Heat exchanger flushing from 80 €

How is a heat exchanger flushed?

Heat exchanger flushing is carried out by a specialist using professional chemicals and equipment. This is what the whole process looks like:

01
System diagnostics The specialist assesses how heavily the heat exchanger is scaled, checks the system pressure and decides on the most suitable flushing method.
02
System preparation The system is switched off and the water is drained. The heat exchanger is disconnected or left in the system, depending on the flushing method.
03
Chemical flushing A special chemical solution is introduced into the system; it dissolves limescale, sludge and dirt. The solution circulates in the system for a set time.
04
Rinsing After chemical flushing the system is rinsed thoroughly with clean water – remaining dirt and residues of the chemical solution are removed.
05
System start-up and check The system is filled with water, the pressure is adjusted and the system is started. The specialist checks that the system works efficiently and that there are no leaks.
06
Report and recommendations The customer is told what work has been done and receives recommendations on when to do the next flushing.

Which heat exchangers do we flush?

We flush all types of heat exchangers, whatever the manufacturer or model of the unit:

Gas boiler heat exchangers

Primary and secondary heat exchangers, responsible for heating and hot water.

Heat pump heat exchangers

Outdoor and indoor heat exchangers that ensure efficient heat transfer between the surroundings and the heating system.

Heat exchangers of heat recovery units

Responsible for recovering heat from the extracted air; they often get clogged with dust and dirt.

Water heater heat exchangers

Heat exchangers of hot water systems, where limescale builds up quickly.

Heat exchangers of ventilation systems

Heat exchangers of air handling units, which keep the indoor air at the right temperature.

OUR PARTNERS

We are official representatives of these companies:

Viessmann, Immergas, Vaillant, Sime, Baxi, Wolf, Protherm, Rotenso, Ravenheat, Bosch, Junkers, Buderus.

visukatiluremontas.lt – heat exchanger flushing across Lithuania

visu katilu remontas wolf visu katilu remontas viessman visu katilu remontas immergas visu katilu remontas bosch visu katilu remontas baxi visu katilu remontas acv visu katilu remontas buderus visu katilu remontas die dietrich visu katilu remontas junkers visu katilu remontas baretta visu katilu remontas protherm visu katilu remontas ravenheat visu katilu remontas vailant
visu katilu remontas wolf visu katilu remontas viessman visu katilu remontas immergas visu katilu remontas bosch visu katilu remontas baxi visu katilu remontas acv visu katilu remontas buderus visu katilu remontas die dietrich visu katilu remontas junkers visu katilu remontas baretta visu katilu remontas protherm visu katilu remontas ravenheat visu katilu remontas vailant
CallRegister