Magnesium anode replacement
The magnesium anode is a protective part of a water heater that shields the metal walls of the tank from corrosion. Over time the anode wears away and stops doing its job. Corrosion then begins to attack the water heater itself. Replacing the magnesium anode regularly is the simplest and cheapest way to extend the life of a water heater and avoid an expensive repair or replacement. We travel anywhere in Lithuania.
What is a magnesium anode and why does it matter?
A magnesium anode is a special metal rod fitted inside the water heater. It takes the electrochemical corrosion on itself first, protecting the metal walls of the tank and the heating element. As long as the anode is not worn out, corrosion cannot attack the tank.
Without an anode the water heater tank starts to rust, which can lead to: an unpleasant smell from the water, brown water from the tap, corrosion of the tank walls and possible leaks, and the need to replace the water heater early.
Why does the magnesium anode need replacing?
The anode wears away
Over time the magnesium anode is used up completely and can no longer protect the tank from corrosion.
Corrosion damages the tank
Once the anode is worn out, corrosion begins to attack the walls of the tank and the heating element.
Water quality gets worse
As the tank corrodes, the water turns brown and takes on an unpleasant smell.
Early water heater failure
An anode that is not replaced can lead to a tank leak or complete failure that requires an expensive repair or replacement.
Warranty condition
Most manufacturers list regular anode replacement as a warranty condition.
Signs that the magnesium anode needs replacing
Brown or cloudy water. A brown colour shows that the tank has already started to rust because the anode is worn out.
Unpleasant smell of the water. A distinct sulphur or metallic smell points to bacteria or corrosion in the tank.
More than 2 years have passed since the last replacement. Even if the water looks normal, the anode may already be completely worn out.
The water heater has never been serviced. If it has been running for several years without maintenance, the anode most likely needs replacing.
Visible traces of rust. Rust stains on the water heater connections or next to it can mean corrosion problems inside.
How is a magnesium anode replaced?
How often should the magnesium anode be replaced?
How often the magnesium anode needs replacing depends on water hardness, the capacity of the water heater and how heavily it is used:
Every 2 years
Under standard conditions, when the water is not very hard.
Every year
If the water is very hard or the water heater is used intensively.
Urgently
If the water has turned brown, smells unpleasant or more than 3 years have passed since the last replacement.
We recommend combining anode replacement with chemical descaling of the water heater or internal cleaning – this saves time and avoids the cost of an extra visit.
FREQUENTLY ASKED QUESTIONS
Here you will find answers to some of the most frequently asked questions about chemical cleaning of gas boilers.
Can I replace the magnesium anode myself?
Technically it is possible, but you need to know the exact anode type and size for your water heater model, drain the water properly and make sure everything is sealed after the replacement. We recommend leaving this job to a specialist, who will also check the condition of the tank and spot possible problems.
How do I know the anode is worn out?
It cannot be seen from the outside – the anode has to be taken out and inspected. If the anode is more than 50% worn, it needs replacing. That is why we recommend a regular check every 2 years, whatever the water quality.
How long does anode replacement take?
Replacing a magnesium anode usually takes 30–60 minutes. If chemical descaling or internal cleaning is done at the same time, the visit takes longer.
Do all water heaters have a magnesium anode?
Most water heaters with stainless steel or enamelled tanks have a magnesium anode. Some higher-end water heaters with a titanium or fibreglass tank have no anode, as their tank is more resistant to corrosion. Get in touch and tell us your water heater model – we will confirm whether your unit needs anode replacement.
Is it time to replace the magnesium anode, or would you like its condition checked? Get in touch – we will come, take out the anode and check the condition of your water heater anywhere in Lithuania.
OUR PARTNERS
We are official representatives of these companies:
Viessmann, Immergas, Vaillant, Sime, Baxi, Wolf, Protherm, Rotenso, Ravenheat, Bosch, Junkers, Buderus.
visukatiluremontas.lt – magnesium anode replacement across Lithuania

