Pereiti prie turinio

Mon–Fri 8–18

We work across Lithuania

Heat recovery unit checks and servicing

A heat recovery unit supplies fresh air to the rooms while retaining heat – it is one of the most important components for an efficient and healthy indoor climate. For the unit to work properly it needs regular maintenance.

For exactly what the annual check covers, see heat recovery unit annual service.

Heat recovery unit maintenance (annual service) from 100 €
REGISTER

Work carried out by our company:

When does a heat recovery unit need servicing?

A heat recovery unit needs servicing not only when it breaks down. Regular maintenance helps to avoid bigger problems. Contact a specialist if you notice at least one of these signs:

Reduced airflow

The rooms lack fresh air or the ventilation runs weaker than usual.

Higher humidity indoors

Condensation builds up on the windows and the air feels damp.

Unusual noises

Humming, rattling or vibration points to a faulty fan or other mechanical problems.

Warnings on the controller

Error codes or filter replacement messages.

Unpleasant smell from the ventilation

May indicate mould in the filters or ducts.

Higher electricity consumption

Clogged filters or a faulty heat exchanger make the unit work harder.

More than 6 months have passed since the last service

Even if the unit is working, the filters and heat exchanger may be dirty.

Heat recovery unit maintenance (annual service) from 100 €

Heat recovery unit service – what is done during the visit?

1. Visual inspection of the unit
The overall condition of the heat recovery unit is checked: whether there is any mechanical damage, corrosion, traces of moisture or other obvious signs of problems.

2. Filter check and replacement
The condition of the filters and how dirty they are is assessed. Clogged or worn filters are replaced with new ones. This is the most important step in keeping the indoor air clean.

3. Resetting the filter timer
After the filters are replaced, the filter timer or filter message is reset on the controller so that the system tracks the next replacement date accurately.

4. Heat exchanger check and cleaning
The condition and efficiency of the heat exchanger are checked. Accumulated dust and dirt are cleaned off the heat exchanger. This ensures efficient heat recovery and reduces electricity consumption.

5. Fan check and cleaning
The operation of both fans (supply and extract) is checked. The impellers and housing are cleaned of dust deposits, which over time reduce airflow and increase noise.

6. Condensate system check and flushing
The condensate drainage system is checked. The condensate trap and drain are flushed. A blocked drain can cause water to collect in the unit and lead to damp problems.

7. Bypass damper check
The operation of the bypass damper is checked. This damper directs the airflow past the heat exchanger (relevant in summer, when the rooms need cooling). A faulty damper can disrupt the operation of the whole heat recovery unit.

8. Heater check
If the heat recovery unit has an electric heating element or preheater, its operation and technical condition are checked. This is especially important before the cold season.

9. Temperature sensor and connection check
The temperature sensors and main electrical connections are inspected visually. Faulty sensors can cause the system to work incorrectly or show error codes.

10. Air intake and exhaust grille check
The external air intake and exhaust grilles are checked for blockages, bird nests or other obstacles to free airflow.

11. Cleaning of diffusers and indoor grilles
The diffusers and grilles in the rooms are inspected and surface dust is cleaned off. This improves air distribution and appearance.

12. Operating mode check
All operating modes of the unit are checked – whether the system responds correctly to controller commands and switches modes according to the set schedule.

13. Noise, vibration and airflow assessment
The specialist assesses the noise the unit makes, the vibration level and the strength of the airflow. Deviations from the norm may point to faults that are starting to develop.

14. Controller error check
All error codes and warnings stored in the controller are reviewed. Even if the unit is working, hidden error codes may point to an approaching fault.

15. Recommendations
At the end of the visit the customer is told about any damage found, the work done and recommendations for further maintenance, including the date of the next filter change and any risk factors noticed.

Would you like to book a heat recovery unit service? Get in touch – we will come, carry out a full service and make sure the air in your home is clean, anywhere in Lithuania.

REGISTER
+370 630 13331

OUR PARTNERS

We are official representatives of these companies:

Viessmann, Immergas, Vaillant, Sime, Baxi, Wolf, Protherm, Rotenso, Ravenheat, Bosch, Junkers, Buderus.

visukatiluremontas.lt – heat recovery unit checks and annual service across Lithuania

visu katilu remontas wolf visu katilu remontas viessman visu katilu remontas immergas visu katilu remontas bosch visu katilu remontas baxi visu katilu remontas acv visu katilu remontas buderus visu katilu remontas die dietrich visu katilu remontas junkers visu katilu remontas baretta visu katilu remontas protherm visu katilu remontas ravenheat visu katilu remontas vailant
visu katilu remontas wolf visu katilu remontas viessman visu katilu remontas immergas visu katilu remontas bosch visu katilu remontas baxi visu katilu remontas acv visu katilu remontas buderus visu katilu remontas die dietrich visu katilu remontas junkers visu katilu remontas baretta visu katilu remontas protherm visu katilu remontas ravenheat visu katilu remontas vailant
CallRegister