Pereiti prie turinio

Mon–Fri 8–18

We work across Lithuania

Chemical flushing of a gas boiler heat exchanger

Over time, the heat exchanger of a gas boiler scales up – limescale, sludge and mineral deposits build up on its walls, reducing heat transfer efficiency and forcing the boiler to work under a heavier load. Chemical flushing is the most effective way to remove these deposits and restore the boiler to its original efficiency. We clean heat exchangers across Lithuania.

Chemical flushing of a gas boiler 80 €
REGISTER

Why is it important to flush a gas boiler heat exchanger?

Higher efficiency

A clean heat exchanger transfers heat much better than a scaled one, so the boiler reaches the set temperature faster and uses less gas.

Lower gas consumption

Limescale acts as an insulator and forces the boiler to burn more gas to achieve the same heating effect.

Overheating is avoided

A scaled heat exchanger cannot transfer heat efficiently, so the boiler overheats and often shuts down in emergency mode.

Longer boiler life

A heat exchanger that is flushed regularly wears out much more slowly and extends the service life of the whole boiler.

The warranty is kept

Most manufacturers list regular heat exchanger cleaning as a warranty condition.

Chemical flushing of a gas boiler 80 €

Signs that the HEAT EXCHANGER NEEDS FLUSHING

The boiler heats worse than usual. Rooms do not reach the set temperature even though the boiler is running at full capacity.

Higher gas consumption. The boiler uses more gas than usual although your usage has not changed.

The boiler shuts down often. A scaled heat exchanger causes overheating and the system shuts down in emergency mode.

You hear humming or bubbling. Unusual noises in the boiler often point to limescale in the heat exchanger.

The boiler takes a long time to reach the set temperature. Heat transfer has slowed down because of the layer of deposits.

More than 2 years have passed since the last flushing. Even if the boiler works normally, deposits build up and slowly reduce efficiency.

How is chemical flushing done?

01
System assessment The specialist assesses how heavily the heat exchanger is scaled, checks the system pressure and decides on the most suitable flushing method and concentration of the chemical solution.
02
System preparation The boiler is switched off and the system is cooled. The heat exchanger is disconnected from the system or left in place, depending on the flushing method.
03
Introducing the chemical solution A special acidic or alkaline chemical solution is introduced into the heat exchanger; it effectively dissolves limescale, sludge and mineral deposits.
04
Circulation The chemical solution circulates inside the heat exchanger for a set time. This ensures that all deposits dissolve and are removed.
05
Rinsing After chemical flushing the heat exchanger is rinsed thoroughly with clean water. Residues of the chemical solution and dissolved deposits are removed.
06
System start-up and check The system is filled with water, the pressure is adjusted and the system is started. The specialist checks the operation of the boiler and makes sure the system works efficiently.
07
Report and recommendations The customer is told what work has been done and receives recommendations on when to do the next flushing.

HOW often does a gas boiler heat exchanger need flushing?

How often the heat exchanger needs flushing depends on water hardness, how heavily the boiler is used and the condition of the system:

Every 2–3 years

Under standard conditions, when the water is not very hard.

Every year

If the water is very hard or the boiler works intensively.

Urgently

If you notice higher gas consumption, poor heating or frequent boiler shutdowns.

Using water softening filters can reduce limescale build-up and extend the intervals between flushing.

FREQUENTLY ASKED QUESTIONS

Here you will find answers to some of the most frequently asked questions about chemical cleaning of gas boilers.

What is the difference between chemical flushing and ordinary cleaning?

Ordinary cleaning removes external dust and dirt. Chemical flushing removes limescale and sludge from inside the heat exchanger. This can only be done with special chemical solutions that dissolve deposits without damaging the metal.

Will chemical flushing harm the boiler?

No. We use chemical solutions made specifically for heat exchangers, which remove deposits effectively without damaging the metal or other materials. It is important that the flushing is done by a certified specialist using solutions of the right concentration.

How long does chemical flushing take?

Depending on how heavily the heat exchanger is scaled, chemical flushing usually takes 2–4 hours. A heavily scaled heat exchanger may need longer.

Does the water in the system need to be changed after flushing?

Yes. After chemical flushing the system is rinsed thoroughly and filled with clean water. We recommend adding a protective inhibitor, which will protect the system from corrosion and slow down limescale build-up in the future.

Is your boiler heating worse or using more gas than usual? Get in touch – we will come, carry out chemical flushing of the heat exchanger and restore the efficiency of your boiler anywhere in Lithuania.

REGISTER
+370 630 13331

OUR PARTNERS

We are official representatives of these companies:

Viessmann, Immergas, Vaillant, Sime, Baxi, Wolf, Protherm, Rotenso, Ravenheat, Bosch, Junkers, Buderus.

visukatiluremontas.lt – chemical cleaning of gas boilers across Lithuania

visu katilu remontas wolf visu katilu remontas viessman visu katilu remontas immergas visu katilu remontas bosch visu katilu remontas baxi visu katilu remontas acv visu katilu remontas buderus visu katilu remontas die dietrich visu katilu remontas junkers visu katilu remontas baretta visu katilu remontas protherm visu katilu remontas ravenheat visu katilu remontas vailant
visu katilu remontas wolf visu katilu remontas viessman visu katilu remontas immergas visu katilu remontas bosch visu katilu remontas baxi visu katilu remontas acv visu katilu remontas buderus visu katilu remontas die dietrich visu katilu remontas junkers visu katilu remontas baretta visu katilu remontas protherm visu katilu remontas ravenheat visu katilu remontas vailant
CallRegister