Vaillant boiler repair
We repair and service Vaillant gas boilers across Lithuania, including the ecoTEC and atmoTEC ranges. The technician arrives with the most commonly replaced parts, and we take the rest from our own warehouse, where Vaillant parts are stocked by boiler model.

The most common Vaillant error codes
A code shows which safety device or sensor the fault has affected, but not always the cause itself. The table lists the codes we are called out for most often and what you can do yourself.
| Code | What it means | What to do |
|---|---|---|
| F.022 | Too little water in the system | Look at the pressure gauge and, if the pressure is too low, top up the system. If the pressure drops again, call a technician. |
| F.028 | The flame fails to ignite | Check that the gas valve is open and reset the boiler once. If the code comes back, call a technician. |
| F.029 | The flame went out during operation | Do not reset the boiler repeatedly; write down the code and call a technician. |
| F.020 | Overheating, the safety thermostat has tripped | Do not reset the boiler repeatedly; write down the code and call a technician. |
| F.035 | Blocked air and flue pipe | Do not reset the boiler repeatedly; write down the code and call a technician. |
- On the displays of older boilers the same code is shown in a shorter form, for example F.28 instead of F.028.
- If the code comes back after a reset, the manufacturer does not recommend resetting again.
Visi kodai su paaiškinimais ir naudojimo instrukcija: Vaillant ecoTEC plus (78 kodai).
How to top up the system safely is described in our article "Boiler pressure", and how to read the codes and how many times a boiler may be reset – in the article "Boiler error codes".
If you smell gas
Do not reset the boiler and do not operate any switches. Open the windows, close the gas valve if you can, go outside and from there call the gas emergency service on 1804 or 112.
What we do for Vaillant boilers
- Fault diagnostics – call-out and diagnostics 70 €. We identify the fault and tell you the repair price before starting work.
- Repair: electronics, burner, pump, heat exchanger, valves, sensors, electrodes.
- Annual service – 130 €: cleaning, combustion and tightness check, settings.
- Emergency help if the boiler has stopped in the cold season.
All prices are on the prices page. After the work you receive a work completion report and a warranty.
Vaillant boiler parts
When you call a technician, give the exact code and the boiler model. The model is on the manufacturer's label, usually on the underside of the boiler. The technician then knows in advance which parts may be needed and often fixes the fault in one visit.
If you want to buy a part yourself, you will find Vaillant parts in our shop, where you can search for them by boiler model and exploded diagram.
Frequently asked questions
How much does a Vaillant boiler repair cost?
Call-out and fault diagnostics cost 70 €. The repair price depends on the fault and the parts; we tell you the price once the fault is identified, before starting work. You are not obliged to have the repair done after diagnostics.
What does Vaillant error F.022 mean?
There is too little water in the system. Look at the pressure gauge and, if the pressure is too low, top up the system. If the pressure drops again, call a technician.
Do you have parts for Vaillant boilers?
The technician brings the most commonly replaced parts with him. We take the others from our own warehouse or order them by boiler model.
How often does a Vaillant boiler need to be checked?
Once a year, ideally before the heating season. Most manufacturers' warranties are valid only if the boiler is serviced every year.
We also repair
We also repair boilers from other manufacturers. We work across Lithuania: Vilnius, Kaunas, Klaipėda, Šiauliai, Panevėžys and other cities.






