Baxi boiler repair
We repair and maintain Baxi gas boilers across Lithuania, including the Luna, Duo-tec and Eco series. The technician arrives with the most commonly replaced parts, and we take the others from our own warehouse, where we stock Baxi parts by boiler model.

The most common Baxi error codes
A code shows which safety device or sensor the fault has affected, but not always the cause itself. The table lists the codes we are called out for most often and what you can do yourself.
| Code | What it means | What to do |
|---|---|---|
| E118 | Water pressure too low | Look at the pressure gauge and, if the pressure is too low, top up the system. If the pressure drops again, call a technician. |
| E133 | The flame does not ignite (5 failed attempts) | Check that the gas valve is open and reset the boiler once. If the code comes back, call a technician. |
| E110 | Overheating, the safety thermostat has tripped | Do not reset the boiler repeatedly; write down the code and call a technician. |
| E01, E10 | On older models: ignition failure (E01), pressure too low (E10) | For E10, top up the system; for E01, check the gas valve and reset once. |
- 5 reset attempts are allowed, then the boiler shuts down. You need to wait 15 minutes before trying again.
- The reset button must be held for at least 2 seconds.
Visi kodai su paaiškinimais ir naudojimo instrukcija: Baxi Luna Duo-tec E (33 kodai).
How to top up the system safely is described in our article "Boiler pressure", and how to read the codes and how many times a boiler may be reset – in the article "Boiler error codes".
If you smell gas
Do not reset the boiler and do not operate any switches. Open the windows, close the gas valve if you can, go outside and from there call the gas emergency service on 1804 or 112.
What we do for Baxi boilers
- Fault diagnostics – call-out and diagnostics 70 €. We identify the fault and tell you the repair price before starting work.
- Repair: electronics, burner, pump, heat exchanger, valves, sensors, electrodes.
- Annual service – 130 €: cleaning, combustion and tightness check, settings.
- Emergency help if the boiler has stopped in the cold season.
All prices are on the prices page. After the work you receive a work completion report and a warranty.
Baxi boiler parts
When you call a technician, give the exact code and the boiler model. The model is on the manufacturer's label, usually on the underside of the boiler. The technician then knows in advance which parts may be needed and often fixes the fault in one visit.
If you want to buy a part yourself, you will find Baxi parts in our shop, where you can search by boiler model and exploded diagram.
Frequently asked questions
How much does a Baxi boiler repair cost?
Call-out and fault diagnostics cost 70 €. The repair price depends on the fault and the parts; we tell you the price once the fault is identified, before starting work. You are not obliged to have the repair done after diagnostics.
What does Baxi error E118 mean?
Water pressure too low. Look at the pressure gauge and, if the pressure is too low, top up the system. If the pressure drops again, call a technician.
Do you have Baxi boiler parts?
The technician brings the most commonly replaced parts with him. We take the others from our own warehouse or order them by boiler model.
How often does a Baxi boiler need checking?
Once a year, ideally before the heating season. Most manufacturers' warranties are valid only if the boiler is serviced every year.
We also repair
We also repair boilers from other manufacturers. We work across Lithuania: Vilnius, Kaunas, Klaipėda, Šiauliai, Panevėžys and other cities.






