Pereiti prie turinio

Mon–Fri 8–18

We work across Lithuania
Gas boiler service · Junkers

Junkers boiler repair

We repair and service Junkers gas boilers across Lithuania, including the Cerapur and Ceraclass ranges. The technician arrives with the most commonly replaced parts, and we take the rest from our own warehouse, where Junkers parts are stocked by boiler model.

Junkers

The most common Junkers error codes

A code shows which safety device or sensor the fault has affected, but not always the cause itself. The table lists the codes we are called out for most often and what you can do yourself.

CodeWhat it meansWhat to do
EANo flame detectedCheck that the gas valve is open and reset the boiler once. If the code comes back, call a technician.
CESystem pressure too lowLook at the pressure gauge and, if the pressure is too low, top up the system. If the pressure drops again, call a technician.
227On newer models: the flame does not igniteCheck that the gas valve is open and reset the boiler once. If the code comes back, call a technician.

How to top up the system safely is described in our article "Boiler pressure", and how to read the codes and how many times a boiler may be reset – in the article "Boiler error codes".

If you smell gas

Do not reset the boiler and do not operate any switches. Open the windows, close the gas valve if you can, go outside and from there call the gas emergency service on 1804 or 112.

What we do for Junkers boilers

All prices are on the prices page. After the work you receive a work completion report and a warranty.

Junkers boiler parts

When you call a technician, give the exact code and the boiler model. The model is on the manufacturer's label, usually on the underside of the boiler. The technician then knows in advance which parts may be needed and often fixes the fault in one visit.

If you want to buy a part yourself, you will find Junkers parts in our shop, where you can search for them by boiler model and exploded diagram.

Frequently asked questions

How much does a Junkers boiler repair cost?

Call-out and fault diagnostics cost 70 €. The repair price depends on the fault and the parts; we tell you the price once the fault is identified, before starting work. You are not obliged to have the repair done after diagnostics.

What does Junkers error EA mean?

No flame is detected. Check that the gas tap is open and reset the boiler once. If the code comes back, call a technician.

Do you have parts for Junkers boilers?

The technician brings the most commonly replaced parts with him. We take the others from our own warehouse or order them by boiler model.

How often does a Junkers boiler need to be checked?

Once a year, ideally before the heating season. Most manufacturers' warranties are valid only if the boiler is serviced every year.

We also repair

We also repair boilers from other manufacturers. We work across Lithuania: Vilnius, Kaunas, Klaipėda, Šiauliai, Panevėžys and other cities.

CallRegister