Immergas boiler repair
We repair and service Immergas gas boilers across Lithuania, including the Victrix and Eolo ranges. The technician arrives with the most commonly replaced parts, and we take the rest from our own warehouse, where Immergas parts are stocked by boiler model.

The most common Immergas error codes
A code shows which safety device or sensor the fault has affected, but not always the cause itself. The table lists the codes we are called out for most often and what you can do yourself.
| Code | What it means | What to do |
|---|---|---|
| 10 | System pressure too low | Look at the pressure gauge and, if the pressure is too low, top up the system. If the pressure drops again, call a technician. |
| 01 | The flame does not ignite | Check that the gas valve is open and reset the boiler once. If the code comes back, call a technician. |
| 02 | Overheating, the safety thermostat has tripped | Do not reset the boiler repeatedly; write down the code and call a technician. |
| 08 | Reset attempts used up | Wait at least an hour. If the boiler stops again, call a technician. |
- 5 resets in a row are allowed. After that the function is locked for at least an hour and the display shows code 08.
- The list of the last 8 faults can be viewed in the boiler's information menu.
Visi kodai su paaiškinimais ir naudojimo instrukcija: Immergas Victrix Tera V2 (27 kodai).
How to top up the system safely is described in our article "Boiler pressure", and how to read the codes and how many times a boiler may be reset – in the article "Boiler error codes".
If you smell gas
Do not reset the boiler and do not operate any switches. Open the windows, close the gas valve if you can, go outside and from there call the gas emergency service on 1804 or 112.
What we do for Immergas boilers
- Fault diagnostics – call-out and diagnostics 70 €. We identify the fault and tell you the repair price before starting work.
- Repair: electronics, burner, pump, heat exchanger, valves, sensors, electrodes.
- Annual service – 130 €: cleaning, combustion and tightness check, settings.
- Emergency help if the boiler has stopped in the cold season.
All prices are on the prices page. After the work you receive a work completion report and a warranty.
Immergas boiler parts
When you call a technician, give the exact code and the boiler model. The model is on the manufacturer's label, usually on the underside of the boiler. The technician then knows in advance which parts may be needed and often fixes the fault in one visit.
If you want to buy a part yourself, you will find Immergas parts in our shop, where you can search for them by boiler model and exploded diagram.
Frequently asked questions
How much does an Immergas boiler repair cost?
Call-out and fault diagnostics cost 70 €. The repair price depends on the fault and the parts; we tell you the price once the fault is identified, before starting work. You are not obliged to have the repair done after diagnostics.
What does Immergas error 10 mean?
The system pressure is too low. Look at the pressure gauge and, if the pressure is too low, top up the system. If the pressure drops again, call a technician.
Do you have parts for Immergas boilers?
The technician brings the most commonly replaced parts with him. We take the others from our own warehouse or order them by boiler model.
How often does an Immergas boiler need to be checked?
Once a year, ideally before the heating season. Most manufacturers' warranties are valid only if the boiler is serviced every year.
We also repair
We also repair boilers from other manufacturers. We work across Lithuania: Vilnius, Kaunas, Klaipėda, Šiauliai, Panevėžys and other cities.






